Fundamentals of Graphics Communication

Author: Gary R. Bertoline,Eric N. Wiebe

Publisher: McGraw Hill Professional

ISBN: 9780072864588

Category: Computers

Page: 832

View: 7070

DOWNLOAD NOW »

Fundamentals of Graphics Communication presents a modern approach to engineering and technical graphics. It covers drawing techniques from a modern, CAD-oriented perspective, as well as a traditional perspective. The engineering design process receives special attention throughout this text, through the use of design case studies, a consistent problem-solving methodology, many real examples taken from industry, and a selection of design problems for the student to try.The text is supported by a rich assortment of supplements, including CAD workbooks, additional drawing problems, animation, tutorials, and a dynamic On-Line Learning center for students and instructors.

Technical graphics communication

Author: Gary R. Bertoline,Leonard O. Nasman

Publisher: McGraw-Hill/Irwin

ISBN: N.A

Category: Technology & Engineering

Page: 1128

View: 3282

DOWNLOAD NOW »

In its third edition, Technical Graphics Communication,, has become a standard in the field of engineering and technical graphics. This text presents both traditional and modern approaches to technical graphics, providing engineering and technology students with a strong foundation in standard drafting practices and techniques.A strong emphasis on design and industry is found throughout, reinforcing the real and practical ways that technical graphics skills are used in real companies.

Introduction to Graphics Communications for Engineers

Author: Gary R. Bertoline

Publisher: McGraw-Hill Science, Engineering & Mathematics

ISBN: 9780073048369

Category: Computers

Page: 256

View: 6913

DOWNLOAD NOW »

Introduction to Graphics Communication for Engineers is a short introductory technical drawing text intended for use in technical drawing or drafting courses at two and four year schools or other technology programs. Powerful computers and CAD software are of little use to engineers who do not fully understand the fundamentals of graphics communication principles and 3-D modeling strategies, or do not possess a level of visualization ability. Because of this, Bertoline concentrates on the concepts and skills necessary to sketch and create 2-D drawings and 3-D CAD models in this text. New to the third edition are "Design in Industry Boxes" that cover an aspect of design as practiced in industry. Quotes and interesting stories from practicing engineers make the boxes motivating and informative for students. Also new are practice sketching problems included throughout each chapter, which allow students a chance to practice what they are learning. This book is part of the B.E.S.T. (Basic Engineering Series and Tools), which consists of modularized textbooks offering virtually every topic and specialty likely to be of interest to engineers.

Technical Drawing with Engineering Graphics

Author: Frederick E. Giesecke,Ivan Leroy Hill,Henry C. Spencer,John Thomas Dygdon,James E. Novak,Shawna D. Lockhart

Publisher: N.A

ISBN: 9781292026183

Category: Computers

Page: 840

View: 2843

DOWNLOAD NOW »

For courses in Technical Drawing, Engineering Graphics, Engineering Design Communication, Drafting, Visualization, at level beginner through advanced. Technical Drawing and Engineering Graphics, Fourteenth Edition, provides a clear, comprehensive introduction and detailed, easy-to-use reference to creating 2D documentation drawings and engineering graphics by hand or using CAD. It offers excellent technical detail, up-to-date standards, motivating real-world examples, and clearly explained theory and technique in a colorful, highly visual, concisely written format. Designed as an efficient tool for busy, visually oriented learners, this edition expands on well-tested material

Technical Drawing for Engineering Communication

Author: David E. Goetsch,Raymond L. Rickman,William S. Chalk

Publisher: Cengage Learning

ISBN: 1305445465

Category: Architecture

Page: 1008

View: 4873

DOWNLOAD NOW »

TECHNICAL DRAWING FOR ENGINEERING COMMUNICATION, 7E offers a fresh, modern approach to technical drawing that combines the most current industry standards with up-to-date technologies and software, resulting in a valuable, highly relevant resource you won't want to be without. The book builds on features that made its previous editions so successful: comprehensive coverage of the total technical drawing experience that explores both the basic and advanced aspects of engineering and industrial technology and reviews both computer modeling and more traditional methods of technical drawing. Enhancements for the seventh edition include updates based on industry trends and regulations, an all-new chapter on employability skills, and additional content on SolidWorks 3D modeling software for drafting technicians. The end result is a tool that will give you the real-world skills needed for a successful career in CAD, drafting, or design. Important Notice: Media content referenced within the product description or the product text may not be available in the ebook version.

Modern Graphics Communication

Author: Frederick Ernest Giesecke

Publisher: N.A

ISBN: 9780138003562

Category: Computer-aided design

Page: 784

View: 469

DOWNLOAD NOW »

For undergraduate courses in Introductory Drafting, Technical Drawing, and Engineering Graphics. This full-color text is a clear and comprehensive introduction and reference for students and professionals creating engineering drawings and graphics by hand or using CAD. It offers excellent technical detail, up-to-date standards, motivating real-world examples, and clearly explained theory and technique in a colorful, highly visual, concisely written format. Designed as an efficient tool for busy, visually oriented learners, this edition expands on well-tested material, bringing its content up to date with the latest standards, materials, industries and production processes. Colored models and animations bring the material to life for the student on the book's companion website.

Engineering Drawing for Manufacture

Author: Brian Griffiths

Publisher: Elsevier

ISBN: 008050566X

Category: Technology & Engineering

Page: 150

View: 4738

DOWNLOAD NOW »

The processes of manufacture and assembly are based on the communication of engineering information via drawing. These drawings follow rules laid down in national and international standards. The organisation responsible for the international rules is the International Standards Organisation (ISO). There are hundreds of ISO standards on engineering drawing because drawing is very complicated and accurate transfer of information must be guaranteed. The information contained in an engineering drawing is a legal specification, which contractor and sub-contractor agree to in a binding contract. The ISO standards are designed to be independent of any one language and thus much symbology is used to overcome any reliance on any language. Companies can only operate efficiently if they can guarantee the correct transmission of engineering design information for manufacturing and assembly. This book is a short introduction to the subject of engineering drawing for manufacture. It should be noted that standards are updated on a 5-year rolling programme and therefore students of engineering drawing need to be aware of the latest standards. This book is unique in that it introduces the subject of engineering drawing in the context of standards.

Technical Drawing

Author: David L. Goetsch

Publisher: Cengage Learning

ISBN: 9781401857608

Category: Technology & Engineering

Page: 1121

View: 1050

DOWNLOAD NOW »

CD-ROM contains: Mechanical (CAD) drawing files that are correlated to various exercises and problems in the book.

Engineering Graphics Essentials with AutoCAD 2017 Instruction

Author: Kirstie Plantenberg

Publisher: SDC Publications

ISBN: 1630570214

Category: Computers

Page: 944

View: 7040

DOWNLOAD NOW »

Engineering Graphics Essentials with AutoCAD 2017 Instruction gives students a basic understanding of how to create and read engineering drawings by presenting principles in a logical and easy to understand manner. It covers the main topics of engineering graphics, including tolerancing and fasteners, while also teaching students the fundamentals of AutoCAD 2017. This book features independent learning material containing supplemental content to further reinforce these principles. Through its many different exercises this text is designed to encourage students to interact with the instructor during lectures, and it will give students a superior understanding of engineering graphics and AutoCAD. The independent learning material allows students to go through the topics of the book independently. The main content of the material contains pages that summarize the topics covered in the book. Each page has voice over content that simulates a lecture environment. There are also interactive examples that allow students to go through the instructor led and in-class student exercises found in the book on their own. Video examples are also included to supplement the learning process.

Graphics Drawing Workbook

Author: Gary R. Bertoline

Publisher: McGraw-Hill Science Engineering

ISBN: 9780072336085

Category: Computers

Page: 256

View: 9473

DOWNLOAD NOW »

The Graphics Drawing Workbook is meant to be used with either Technical Graphics Communications 2nd Edition or Fundamentals of Graphics Communications 2nd Edition. However the workbook can be used with any good reference text including Graphics communication for engineers by this author.. . There are workbook problems for every major topic normally taught in an engineering or technical drawing course. Most of the problems can be drawn with instruments or sketched. a special emphasis has been put on freehand sketching in this workbook in response to the increased use of CAD in many technical drawing courses. It is expected that the instructor will supplement these problems with others from the text to fully reinforce technical drawing topics.

Fundamental of Graphics Communication-Engineering Graphics, 5th Ed, Bertoline & Wiebe, 2007

Fundamental of Graphics Communication-Engineering Graphics

Author: The McGraw-Hill Companies, Inc

Publisher: Bukupedia

ISBN: N.A

Category: Mathematics

Page: 821

View: 6471

DOWNLOAD NOW »

Preface changes in the content and process of graphics instruction. Although many graphics concepts remain the same, the fields of engineering and technical graphics are in a transition phase from hand tools to the computer, and the emphasis of instruction is changing from drafter to 3-D geometric modeler, using computers instead of paper and pencil. We realize that hand sketching will continue to be an important part of engineering and technical graphics for some time to come. Therefore, the text contains an appropriate mix of hand sketching and CAD instruction. Goals of the Text The primary goal of this text is to help the engineering and technology student learn the techniques and standard practices of technical graphics, so that design ideas can be adequately communicated and produced. The text concentrates on the concepts and skills necessary for sketching, 2-D, and 3-D CAD. The primary goals of the text are to show how to: 1. Clearly represent and control mental images. 2. Graphically represent technical designs, using accepted standard practices. 3. Use plane and solid geometric forms to create and communicate design solutions. 4. Analyze graphics models, using descriptive and spatial geometry. 5. Solve technical design problems, using traditional tools or CAD. 6. Communicate graphically, using sketches, traditional tools, and CAD. 7. Apply technical graphics principles to many engineering disciplines. Engineering and technical graphics have gone through significant changes in the last decade, due to the use of computers and CAD software. It seems as if some new hardware or software development that impacts technical graphics is occurring every year. Although these changes are important to the subject of technical graphics, there is much about the curriculum that has not changed. Engineers and technologists still find it necessary to communicate and interpret designs, using graphics methods such as drawings or computer models. As powerful as today’s computers and CAD software have become, they are of little use to engineers and technologists who do not fully understand fundamental graphics principles and 3-D modeling strategies or do not possess a high-level visualization ability. To the authors of this text, teaching graphics is not a job; it is a “life mission.” We feel that teaching is an important profession, and that the education of our engineers is critical to the future of our country. Further, we believe that technical graphics is an essential, fundamental part of a technologist’s education. We also believe that many topics in graphics and the visualization process can be very difficult for some students to understand and learn. For these and other reasons, we have developed this text, which addresses both traditional and modern elements of technical graphics, using what we believe to be an interesting and straightforward approach. In Chapter 1, you will learn about the “team” concept for solving design problems. The authors of this text used this concept, putting together a team of authors, reviewers, industry representatives, focus group, and illustrators, and combining that team with the publishing expertise at McGraw-Hill to develop a modern approach to the teaching of technical graphics. This new-generation graphics text therefore is based on the premise that there must be some fundamental Bertoline−Wiebe: Fundamentals of Graphics Communication, Fifth Edition Front Matter Preface © The McGraw−Hill 3 Companies, 2007 What Is Different and Why Much thought has gone into designing a complete instructional approach to the teaching and learning of engineering and technical graphics. The instructor is provided with a number of tools to assist in the instruction aspects, and the student is provided with tools to assist in the learning process. This text was written specifically using techniques that will prepare students to use engineering and technical graphics concepts, practices, and modern tools, to solve design problems and communicate graphically. One goal was to provide a textbook that was clear, interesting, relevant, and contemporary. Some of the distinguishing features of this text include the following: 1. Modern topics—The book is filled with modern examples, illustrations, and industry examples so students can relate to the material being presented. 2. Emphasis on visualization—Integrated throughout the text are visualization topics, explanations, and assignments to constantly reinforce and improve the student’s visualization skills. 3. 3-D modeling chapter—This unique chapter is devoted exclusively to the theory and practice of 3-D modeling. 4. Modern parts used for problem assignments— Most end-of-chapter problems are parts or assemblies of modern devices and products. 5. Integration of CAD—CAD concepts and practices have been integrated through all the chapters when they are relevant to the topic. They are not simply “tacked onto” the end of a chapter. 6. Integration of design—Design concepts are integrated through the text to give relevance and understanding of the relationship of design to technical graphics. Coverage of Modern Topics One of the primary reasons we wrote the text is that many modern topics either are not found or not covered in sufficient detail in traditional texts. Examples of contemporary topics covered in this book include: Computer simulation Mechanism analysis Human factors Product data management (PDM) Design for manufacturability (DFM) Knowledge-based engineering (KBE) Virtual reality (VR) Visualization 3-D modeling problems, concepts, and practices Coordinate space Product Lifecycle Management (PLM) Multiviews from 3-D CAD models Right-hand rule Polar, cylindrical, spherical, absolute, relative, world, and local coordinate systems Freeform curves Spline curves Bezier curves Geometric surfaces Double-curved surfaces NURBS Fractals IGES PDES Missing lines Concurrent engineering Collaborative engineering Designer’s notebook Contour sketching Upside-down sketching Negative space sketching Extensive Coverage of Traditional Topics Even though we firmly believe our coverage results in the most modern text available, we have been very careful to include all the traditional topics normally found in a technical drawing textbook. Students must learn the fundamentals whether using hand tools or CAD to communicate graphically. Therefore, coverage of traditional topics is comprehensive and in many cases includes step-by-step procedures and enhanced color illustrations to facilitate teaching and learning. The text includes the latest ANSI standard practices used in industry. Following are some of the major traditional topics covered in detail in this text. Orthographic projection Descriptive geometry Intersections and developments Geometry and construction Isometric drawings Oblique drawings Auxiliary views Section views xviii PREFACE Bertoline−Wiebe: Fundamentals of Graphics Communication, Fifth Edition 4 Front Matter Preface © The McGraw−Hill Companies, 2007 Preface xix Right Oblique No! u w v u w v u w v Profile Direction of

Architectural Graphics

Author: Francis D. K. Ching

Publisher: John Wiley & Sons

ISBN: 111903566X

Category: Architecture

Page: 272

View: 1497

DOWNLOAD NOW »

This guide offers an introduction to using graphic tools and drafting conventions to translate architectural ideas into effective visual presentations, using drawings to illustrate the topic effectively. This updated edition includes new information on orthographic projection in relation to 3D models, and revised explanations of line weights, scale and dimensioning, and perspective drawing to clarify some of the most difficult concepts. New examples of modern furniture, APA facilities, and presentation layout provide more up-to-date visuals, and the Reference Center features all new animations, videos, and practice exercises.

Visual Strategies

A Practical Guide to Graphics for Scientists & Engineers

Author: Felice Frankel,Angela H. DePace

Publisher: Yale University Press

ISBN: 0300176449

Category: Design

Page: 153

View: 2541

DOWNLOAD NOW »

Helps scientists and engineers to communicate research results by showing how to create effective graphics for use in journal submissions, grant proposals, conference posters, presentations and more.

Fundamentals of Graphics Communication

Author: Gary R. Bertoline,Eric N. Wiebe

Publisher: McGraw-Hill Science, Engineering & Mathematics

ISBN: 9780073220789

Category: Technology & Engineering

Page: 655

View: 3312

DOWNLOAD NOW »

Bertoline's text covers the latest CAD tools available to engineering and technology students. As powerful as today's computers and CAD software have become, they are of little use to engineers and technologists who do not fully understand the fundamental graphics principles and 3-D modeling strategies. The new edition covers the fundamentals while emphasizing the important concepts: visualization, 3D modeling real-world design, problem solving and teamwork

Engineering Graphics: Pearson New International Edition

Author: Frederick E. Giesecke,Alva E. Mitchell,Henry C. Spencer,Ivan L. Hill,John Thomas Dygdon,Author

Publisher: Pearson Higher Ed

ISBN: 1292038578

Category:

Page: 768

View: 4390

DOWNLOAD NOW »

For courses in Engineering Graphics/Technical Drawing and Drafting/Technical Sketching. This authoritative text dominates the market by offering the best coverage of basic graphics principles and an unmatched set of fully machineable working drawings. Its practical, well illustrated, step-by-step explanations of procedures have successfully trained students for 60 years, and continue to appeal to today's visually oriented students.

Visualization, Modeling, and Graphics for Engineering Design

Author: Dennis K. Lieu,Sheryl A. Sorby

Publisher: Cengage Learning

ISBN: 1305537688

Category: Architecture

Page: 1086

View: 8705

DOWNLOAD NOW »

Created for the next generation of engineering professionals, VISUALIZATION, MODELING, AND GRAPHICS FOR ENGINEERING DESIGN, Second Edition, combines coverage of traditional drafting essentials and the cutting-edge technology and methods today's professionals need to master for career success. This versatile text provides a strong grounding in fundamentals including core design skills, geometric dimensioning and tolerancing, sketching and drawing, and industry- and discipline-specific applications, even while recognizing how computers have enabled visualizing and modeling techniques that have changed the engineering design process. Working from this modern perspective, the authors explore critical process phases such as creative thinking, product ideation, and advanced analysis, as well as problem solving, collaboration, and communication skills essential for today's engineers and technicians. In addition to numerous updates to reflect the latest technology and trends, the Second Edition of this groundbreaking text features a more streamlined presentation, with a mix of printed and online chapters and a highly modular structure that make it easy to customize coverage for specific courses or interests. Important Notice: Media content referenced within the product description or the product text may not be available in the ebook version.