Piping Systems Manual

Author: Brian Silowash

Publisher: McGraw Hill Professional

ISBN: 0071592776

Category: Technology & Engineering

Page: 432

View: 9706

DOWNLOAD NOW »

In-depth Details on Piping Systems Filled with examples drawn from years of design and field experience, this practical guide offers comprehensive information on piping installation, repair, and rehabilitation. All of the latest codes, standards, and specifications are included. Piping Systems Manual is a hands-on design and engineering resource that explains the reasons behind the designs. You will get full coverage of materials, components, calculations, specifications, safety, and much more. Hundreds of detailed illustrations make it easy to understand the best practices presented in the book. Piping Systems Manual covers: ASME B31 piping codes Specifications and standards Materials of construction Fittings Valves and appurtenances Pipe supports Drafting practice Pressure drop calculations Piping project anatomy Field work and start-up What goes wrong Special services Infrastructure Strategies for remote locations

Facility piping systems handbook

Author: Michael Frankel

Publisher: McGraw-Hill Professional

ISBN: 9780071358774

Category: Architecture

Page: 1200

View: 1647

DOWNLOAD NOW »

Everything you need to plan, select, design, specify, and test entire piping systemsHere's a complete design guide and reference for all service and utility piping systems found in laboratory, R&D, chemical, commercial, industrial, pharmaceutical, biotechnological, and health care facilities. This all-in-one handbook covers techniques used for selecting appropriate piping, valves, pumps, tanks, and other equipment involved with piping systems both inside of buildings and on the site. Systems for proper facility functioning, enhancing building aesthetics, and efficient production and manufacturing are discussed in depth. Using a total systems approach, this Handbook progresses from fundamentals of system and component operation to a design procedure that allows quick and accurate component and pipe sizing.Detailed chapters explore heat loss, insulation, freeze protection, water treatment and purification, and filtration and separation. You'll also find all necessary system design criteria; specs and selection tips for piping, valves, and jointing methods; examples of system design procedures using actual field conditions; and listings of FDA, EPA, and OSHA requirements. This new edition has been revised to include metric units throughout; updated codes and standards that reflect all changes since 1996; and new material on flow level measurement, drinking water systems, septic systems, and hot water circulating systems. The plumbing chapter has been updated to reflect changes in plumbing codes, along with additional material on pipe space requirements and fixture mounting heights.Complete with formulas, charts, and tables that increase your efficiency on the job, this Handbook will prove invaluable at the workplace.

Piping and Pipeline Calculations Manual

Construction, Design Fabrication and Examination

Author: Philip Ellenberger

Publisher: Elsevier

ISBN: 0124169686

Category: Technology & Engineering

Page: 412

View: 9477

DOWNLOAD NOW »

Piping and Pipeline Calculations Manual, Second Edition provides engineers and designers with a quick reference guide to calculations, codes, and standards applicable to piping systems. The book considers in one handy reference the multitude of pipes, flanges, supports, gaskets, bolts, valves, strainers, flexibles, and expansion joints that make up these often complex systems. It uses hundreds of calculations and examples based on the author's 40 years of experiences as both an engineer and instructor. Each example demonstrates how the code and standard has been correctly and incorrectly applied. Aside from advising on the intent of codes and standards, the book provides advice on compliance. Readers will come away with a clear understanding of how piping systems fail and what the code requires the designer, manufacturer, fabricator, supplier, erector, examiner, inspector, and owner to do to prevent such failures. The book enhances participants' understanding and application of the spirit of the code or standard and form a plan for compliance. The book covers American Water Works Association standards where they are applicable. Updates to major codes and standards such as ASME B31.1 and B31.12 New methods for calculating stress intensification factor (SIF) and seismic activities Risk-based analysis based on API 579, and B31-G Covers the Pipeline Safety Act and the creation of PhMSA

The CRC Handbook of Mechanical Engineering, Second Edition

Author: D. Yogi Goswami

Publisher: CRC Press

ISBN: 1420041584

Category: Technology & Engineering

Page: 2688

View: 2738

DOWNLOAD NOW »

Since the first edition of this comprehensive handbook was published ten years ago, many changes have taken place in engineering and related technologies. Now, this best-selling reference has been updated for the 21st century, providing complete coverage of classic engineering issues as well as groundbreaking new subject areas. The second edition of The CRC Handbook of Mechanical Engineering covers every important aspect of the subject in a single volume. It continues the mission of the first edition in providing the practicing engineer in industry, government, and academia with relevant background and up-to-date information on the most important topics of modern mechanical engineering. Coverage of traditional topics has been updated, including sections on thermodynamics, solid and fluid mechanics, heat and mass transfer, materials, controls, energy conversion, manufacturing and design, robotics, environmental engineering, economics and project management, patent law, and transportation. Updates to these sections include new references and information on computer technology related to the topics. This edition also includes coverage of new topics such as nanotechnology, MEMS, electronic packaging, global climate change, electric and hybrid vehicles, and bioengineering.

Transmission Pipeline Calculations and Simulations Manual

Author: E. Shashi Menon

Publisher: Gulf Professional Publishing

ISBN: 1856178315

Category: Technology & Engineering

Page: 612

View: 1882

DOWNLOAD NOW »

Transmission Pipeline Calculations and Simulations Manual is a valuable time- and money-saving tool to quickly pinpoint the essential formulae, equations, and calculations needed for transmission pipeline routing and construction decisions. The manual’s three-part treatment starts with gas and petroleum data tables, followed by self-contained chapters concerning applications. Case studies at the end of each chapter provide practical experience for problem solving. Topics in this book include pressure and temperature profile of natural gas pipelines, how to size pipelines for specified flow rate and pressure limitations, and calculating the locations and HP of compressor stations and pumping stations on long distance pipelines. Case studies are based on the author’s personal field experiences Component to system level coverage Save time and money designing pipe routes well Design and verify piping systems before going to the field Increase design accuracy and systems effectiveness

Using the Engineering Literature, Second Edition

Author: Bonnie A. Osif

Publisher: CRC Press

ISBN: 1439850038

Category: Technology & Engineering

Page: 600

View: 8816

DOWNLOAD NOW »

With the encroachment of the Internet into nearly all aspects of work and life, it seems as though information is everywhere. However, there is information and then there is correct, appropriate, and timely information. While we might love being able to turn to Wikipedia® for encyclopedia-like information or search Google® for the thousands of links on a topic, engineers need the best information, information that is evaluated, up-to-date, and complete. Accurate, vetted information is necessary when building new skyscrapers or developing new prosthetics for returning military veterans While the award-winning first edition of Using the Engineering Literature used a roadmap analogy, we now need a three-dimensional analysis reflecting the complex and dynamic nature of research in the information age. Using the Engineering Literature, Second Edition provides a guide to the wide range of resources available in all fields of engineering. This second edition has been thoroughly revised and features new sections on nanotechnology as well as green engineering. The information age has greatly impacted the way engineers find information. Engineers have an effect, directly and indirectly, on almost all aspects of our lives, and it is vital that they find the right information at the right time to create better products and processes. Comprehensive and up to date, with expert chapter authors, this book fills a gap in the literature, providing critical information in a user-friendly format.

Estimator's Piping Man-Hour Manual

Author: John S. Page

Publisher: Elsevier

ISBN: 9780080506005

Category: Business & Economics

Page: 256

View: 6959

DOWNLOAD NOW »

This reference provides reliable piping estimating data including installation of pneumatic mechanical instrumentation used in monitoring various process systems. This new edition has been expanded and updated to include installation of pneumatic mechanical instrumentation, which is used in monitoring various process systems.

Handbook of Mechanical Engineering Calculations, Second Edition

Author: Tyler G. Hicks

Publisher: McGraw Hill Professional

ISBN: 0071486992

Category: Technology & Engineering

Page: 1436

View: 6039

DOWNLOAD NOW »

Solve any mechanical engineering problem quickly and easily This trusted compendium of calculation methods delivers fast, accurate solutions to the toughest day-to-day mechanical engineering problems. You will find numbered, step-by-step procedures for solving specific problems together with worked-out examples that give numerical results for the calculation. Covers: Power Generation; Plant and Facilities Engineering; Environmental Control; Design Engineering New Edition features methods for automatic and digital control; alternative and renewable energy sources; plastics in engineering design

Piping Calculations Manual

Author: Shashi Menon

Publisher: McGraw-Hill Prof Med/Tech

ISBN: 0071440909

Category: Technology & Engineering

Page: 666

View: 3231

DOWNLOAD NOW »

This on-the-job resource is packed with all the formulas, calculations, and practical tips necessary to smoothly move gas or liquids through pipes, assess the feasibility of improving existing pipeline performance, or design new systems. Contents: Water Systems Piping * Fire Protection Piping Systems * Steam Systems Piping * Building Services Piping * Oil Systems Piping * Gas Systems Piping * Process Systems Piping * Cryogenic Systems Piping * Refrigeration Systems Piping * Hazardous Piping Systems * Slurry and Sludge Systems Piping * Wastewater and Stormwater Piping * Plumbing and Piping Systems * Ash Handling Piping Systems * Compressed Air Piping Systems * Compressed Gases and Vacuum Piping Systems * Fuel Gas Distribution Piping Systems

Handbook of Mechanical Engineering Calculations

Author: Tyler Gregory Hicks

Publisher: McGraw-Hill Professional Publishing

ISBN: N.A

Category: Technology & Engineering

Page: 1536

View: 1300

DOWNLOAD NOW »

With the help of this guide to calculation methods, you can solve any mechanical engineering problemÑquickly and easily. You'll get step-by-step methods for solving thousands of problemsÑtogether with worked-out examples that give the results for the calculations...logical organization for accessibility under the headings of power generation, plant and facilities, environmental control, and design engineering...and special coverage of software design validation, steam generation, environmental issues, gas turbine systems, and indoor energy conservation.

Mechanical Engineering Reference Manual for the PE Exam

Author: Michael R. Lindeburg

Publisher: Professional Publications Incorporated

ISBN: 9781591260493

Category: Technology & Engineering

Page: 1296

View: 9104

DOWNLOAD NOW »

As the most comprehensive reference and study guide available for engineers preparing for the breadth-and-depth mechanical PE examination, the twelfth edition of the Mechanical Engineering Reference Manual provides a concentrated review of the exam topics. Thousands of important equations and methods are shown and explained throughout the Reference Manual, plus hundreds of examples with detailed solutions demonstrate how to use these equations to correctly solve problems on the mechanical PE exam. Dozens of key charts, tables, and graphs, including updated steam tables and two new charts of LMTD heat exchanger correction factors, make it possible to work most exam problems using the Reference Manual alone. A complete, easy-to-use index saves you valuable time during the exam as it helps you quickly locate important information needed to solve problems. _____________________________ Since 1975 more than 2 million people preparing for their engineering, surveying, architecture, LEED®, interior design, and landscape architecture exams have entrusted their exam prep to PPI. For more information, visit us at www.ppi2pass.com.

Marks' Standard Handbook for Mechanical Engineers, 12th Edition

Author: Ali M. Sadegh,William M. Worek

Publisher: McGraw Hill Professional

ISBN: 1259588513

Category: Technology & Engineering

Page: 1509

View: 9997

DOWNLOAD NOW »

The 100th Anniversary Edition of the “Bible” for Mechanical Engineers—Fully Revised to Focus on the Core Subjects Critical to the Discipline This 100th Anniversary Edition has been extensively updated to deliver current, authoritative coverage of the topics most critical to today’s Mechanical Engineer. Featuring contributions from more than 160 global experts, Marks’ Standard Handbook for Mechanical Engineers, Twelfth Edition, offers instant access to a wealth of practical information on every essential aspect of mechanical engineering. It provides clear, concise answers to thousands of mechanical engineering questions. You get, accurate data and calculations along with clear explanations of current principles, important codes, standards, and practices. All-new sections cover micro- and nano-engineering, robotic vision, alternative energy production, biological materials, biomechanics, composite materials, engineering ethics, and much more. Coverage includes: • Mechanics of solids and fluids • Heat • Strength of materials • Materials of engineering • Fuels and furnaces • Machine elements • Power generation • Transportation • Fans, pumps, and compressors • Instruments and controls • Refrigeration, cryogenics, and optics • Applied mechanics • Engineering ethics

Pipe Drafting and Design

Author: Roy A. Parisher,Robert A. Rhea

Publisher: Elsevier

ISBN: 9780080539003

Category: Technology & Engineering

Page: 368

View: 1900

DOWNLOAD NOW »

Pipe designers and drafters provide thousands of piping drawings used in the layout of industrial and other facilities. The layouts must comply with safety codes, government standards, client specifications, budget, and start-up date. Pipe Drafting and Design, Second Edition provides step-by-step instructions to walk pipe designers and drafters and students in Engineering Design Graphics and Engineering Technology through the creation of piping arrangement and isometric drawings using symbols for fittings, flanges, valves, and mechanical equipment. The book is appropriate primarily for pipe design in the petrochemical industry. More than 350 illustrations and photographs provide examples and visual instructions. A unique feature is the systematic arrangement of drawings that begins with the layout of the structural foundations of a facility and continues through to the development of a 3-D model. Advanced chapters discuss the customization of AutoCAD, AutoLISP and details on the use of third-party software to create 3-D models from which elevation, section and isometric drawings are extracted including bills of material. Covers drafting and design fundamentals to detailed advice on the development of piping drawings using manual and AutoCAD techniques 3-D model images provide an uncommon opportunity to visualize an entire piping facility Each chapter includes exercises and questions designed for review and practice

Marks' Standard Handbook for Mechanical Engineers

Author: Eugene A. Avallone,Theodore Baumeister

Publisher: McGraw-Hill Professional

ISBN: 9780070049970

Category: Technology & Engineering

Page: 1792

View: 5116

DOWNLOAD NOW »

Newly revised and expanded Marks! TRY TO STUMP IT! Get your hands on the NEW MARKS and you'll solve any mechanical engineering problem quickly and easily--guaranteed! 2,080 pages of mechanical engineering facts, figures, standards and practices; 3,000 illustrations and 900 tables clarify every important mathematical and engineering principle; collective knowledge of 168 experts helps you answer any analytical, design and application question you'll ever have; Most up-to-date engineering data available in a single source on networks, software, bar coding, electronic distance measurement, LSI and FLSI chips, optical design and more!

Rules of Thumb for Mechanical Engineers

A Manual of Quick, Accurate Solutions to Everyday Mechanical Engineering Problems

Author: J. Edward Pope

Publisher: Gulf Professional Publishing

ISBN: 9780884157908

Category: Technology & Engineering

Page: 405

View: 6699

DOWNLOAD NOW »

Rules of Thumb for Mechanical Engineers assembles hundreds of shortcuts, calculations, practical "how-to" methods, and concise background reviews into one convenient volume. Whether you're concerned with design, selection, or performance of equipment, you'll find fast, accurate answers here. Sixteen chapters are packed with design criteria and practical tips contributed by experts in their respective fields, all without pages of theory. This easy-to-read book presents valuable information on fluids, heat transfer, thermodynamics, seals, pumps and compressors, drivers, gears, bearings, and piping and pressure vessels. Additional coverage is given to tribology, vibrations, materials, stress and fatigue, instrumentation, and engineering economics. Mechanical engineers, maintenance engineers and personnel, and anyone involved in the operation of facilities and equipment will have this volume on his or her desktop more often than on the bookshelf.

Handbook of double containment piping systems

Author: Christopher Ziu

Publisher: McGraw-Hill

ISBN: 9780070730120

Category: Technology & Engineering

Page: 878

View: 1066

DOWNLOAD NOW »

Huge Treasury of Double Containment Piping Data Handbook of Double Containment Piping Systems, by Christopher G. Ziu, arms you with all the data you need for designing and planning virtually every type of double containment system--with complete confidence. Packed with the latest concepts, engineering issues, and rules of design and installation, it takes you step-bystep through construction of both under and aboveground systems--serving up plenty of real-world examples and highly detailed illustrations--so you can ensure optimal performance under even the harshest conditions. You'll have everything you need for: layout, thermal expansion, and structural considerations; fabrication, assembly, and erection; leak detection; inspection, examination, and testing; trenchless reconstruction and alternatives to double containement piping; associated storage tanks and pressure vessels; fluid dynamics and sizing criteria; design of primary metallic, nonmetallic, and secondary containment components; system selection; materials; heat transfer.