Introduction to Environmental Engineering

Author: Mackenzie Leo Davis,David A. Cornwell

Publisher: McGraw-Hill Europe

ISBN: 9780071326247

Category: Environmental engineering

Page: 1024

View: 3630

DOWNLOAD NOW »

Introduction to Environmental Engineering, 5/e contains the fundamental science and engineering principles needed for introductory courses and used as the basis for more advanced courses in environmental engineering. Updated with latest EPA regulations, Davis and Cornwell apply the concepts of sustainability and materials and energy balance as a means of understanding and solving environmental engineering issues. With over 720 end-of-chapter problems, as well as provocative discussion questions, and a helpful list of review items found at the end of each chapter, the text is both a comprehensible and comprehensive tool for any environmental engineering course. Standards and Laws are the most current and up-to-date for an environmental engineering text.

Principles of Environmental Engineering and Science

Author: Mackenzie Leo Davis,Susan J. Masten

Publisher: McGraw-Hill Professional

ISBN: 9780072921861

Category: Technology & Engineering

Page: 704

View: 516

DOWNLOAD NOW »

Principles of Environmental Engineering and Science by Mackenzie Davis and Susan Masten is intended for a course in introductory environmental engineering for sophomore- or junior-level students. The emphasis of this new text is on engineering principles rather than on engineering design. The concept of mass balance is carried throughout the text as a tool for problem solving, and the text boasts extensive coverage of chemistry, biology, and hydrology than other books have. The chemistry review in Chapter 2 and coverage of ethics will aid students in better understanding the engineering topics presented in the book.

Introduction to Environmental Engineering - SI Version

Author: P. Aarne Vesilind,Susan M. Morgan,Lauren G. Heine

Publisher: Cengage Learning

ISBN: 1111780331

Category: Technology & Engineering

Page: 592

View: 9193

DOWNLOAD NOW »

This text presents a balanced treatment of environmental engineering by combining engineering concepts with the importance of environmental ethics. This third edition highlights sustainable development and emphasizes the need for engineers to become even more environmentally responsible during this time of increasing awareness of environmental concerns. The authors challenge students with problems that require not only a technical solution but a thorough consideration of its ethical ramifications. The text also provides comprehensive exposure to all types of environmental problems, including ecosystem dynamics, wastewater treatment, and air pollution control. Important Notice: Media content referenced within the product description or the product text may not be available in the ebook version.

Introduction to chemical engineering thermodynamics

Author: Joseph Mauk Smith,Hendrick C. Van Ness,Michael M. Abbott

Publisher: McGraw-Hill Science/Engineering/Math

ISBN: 9780073104454

Category: Technology & Engineering

Page: 817

View: 3968

DOWNLOAD NOW »

Introduction to Chemical Engineering Thermodynamics, 7/e, presents comprehensive coverage of the subject of thermodynamics from a chemical engineering viewpoint. The text provides a thorough exposition of the principles of thermodynamics and details their application to chemical processes. The chapters are written in a clear, logically organized manner, and contain an abundance of realistic problems, examples, and illustrations to help students understand complex concepts. New ideas, terms, and symbols constantly challenge the readers to think and encourage them to apply this fundamental body of knowledge to the solution of practical problems. The comprehensive nature of this book makes it a useful reference both in graduate courses and for professional practice. The seventh edition continues to be an excellent tool for teaching the subject of chemical engineering thermodynamics to undergraduate students.

Wastewater Engineering

Treatment and Resource Recovery

Author: Metcalf & Eddy Inc,Metcalf & Eddy,George Tchobanoglous,Franklin Louis Burton,H. David Stensel

Publisher: McGraw-Hill Education

ISBN: 9781259010798

Category: Sewage

Page: 1856

View: 8034

DOWNLOAD NOW »

This update of a popular book for civil and environmental engineering majors describes the technological and regulatory changes that have occurred over the last ten years in the discipline.

Introduction to Environmental Engineering

Author: C. David Cooper

Publisher: Waveland Press

ISBN: 1478626526

Category: Technology & Engineering

Page: 405

View: 7968

DOWNLOAD NOW »

Dr. Cooper’s 35 years of university experience and his award-winning teaching style are evident in this highly readable, authoritative introduction to environmental engineering. Appropriate for all branches of engineering, this text presents fundamental knowledge in a logical, up-to-date manner, incorporating abundant examples with step-by-step solutions to illustrate key concepts. Central to Cooper’s treatment is the use of material and energy balances to solve specific environmental engineering problems and to instill a problem-solving mind-set that will benefit readers throughout their careers. Introduction to Environmental Engineering offers an overview of the profession and reviews the math and science essential to environmental engineering practice. The comprehensive coverage includes water resources, drinking water treatment, wastewater treatment, air pollution control, solid and hazardous wastes, energy resources, risk assessment, indoor air quality, and noise pollution. Featuring more than 80 graphics, real-world examples, and extensive end-of-chapter problems (with selected answers), this volume is an outstanding choice for a first course in environmental engineering.

Water Resources Engineering

Author: Larry W. Mays

Publisher: John Wiley & Sons

ISBN: 0470460644

Category: Technology & Engineering

Page: 890

View: 2053

DOWNLOAD NOW »

Environmental engineers continue to rely on the leading resource in the field on the principles and practice of water resources engineering. The second edition now provides them with the most up-to-date information along with a remarkable range and depth of coverage. Two new chapters have been added that explore water resources sustainability and water resources management for sustainability. New and updated graphics have also been integrated throughout the chapters to reinforce important concepts. Additional end-of-chapter questions have been added as well to build understanding. Environmental engineers will refer to this book throughout their careers.

Environmental Engineering

Author: Gerard Kiely

Publisher: N.A

ISBN: 9780071164245

Category: Environmental engineering

Page: 979

View: 4643

DOWNLOAD NOW »

This text successfully integrates engineering and ecological concepts and provides a comprehensive introduction to mathematical modeling of air and water pollution problems. It also includes key chapters on environmental management and numerous worked examples and end-of-chapter exercises.

Environmental Engineering

Author: Howard S. Peavy,Donald R. Rowe,George Tchobanoglous

Publisher: McGraw-Hill Publishing Company

ISBN: 9780071002318

Category: Engineering

Page: 719

View: 7007

DOWNLOAD NOW »

Concrete

Author: Sidney Mindess,J. Francis Young,David Darwin

Publisher: Pearson College Division

ISBN: 9780130646323

Category: Technology & Engineering

Page: 644

View: 6907

DOWNLOAD NOW »

This book presents a unified view of concrete behavior in light of a body of chemical and physical principles. It provides the most up-to-date information available on new concrete materials. The most up-to-date information on new concrete materials. SI units used as primary system, keeping readers current to the unit system being adopted in the United States. Latest ASTM specifications are included. Exercises at the end of each chapter. An excellent resource for professionals in this industry.

Fundamentals of Structural Analysis

Author: Kenneth Leet,Chia-Ming Uang,Anne Gilbert

Publisher: N.A

ISBN: 9780071259293

Category: Structural analysis (Engineering)

Page: 792

View: 3304

DOWNLOAD NOW »

Fundamentals of Structural Analysis third edition introduces engineering and architectural students to the basic techniques for analyzing the most common structural elements, including beams, trusses, frames, cables, and arches. Leet et al cover the classical methods of analysis for determinate and indeterminate structures, and provide an introduction to the matrix formulation on which computer analysis is based. Third edition users will find that the text's layout has improved to better illustrate example problems, superior coverage of loads is give in Chapter 2 and over 25% of the homework problems have been revised or are new to this edition.

Introduction to engineering and the environment

Author: Edward S. Rubin,Cliff I. Davidson

Publisher: McGraw-Hill Science/Engineering/Math

ISBN: 9780072354676

Category: Science

Page: 696

View: 3846

DOWNLOAD NOW »

This book covers a broad range of topics for an introductory course in Environmental Engineering, as well as courses related to engineering design, sustainable development, and environmental policy. Through applications in different engineering domains, students develop the fundamental skills and insights needed to recognize and address environmental problem solving opportunities.

Structural Analysis in SI Units

Author: Russell C. Hibbeler

Publisher: Pearson Higher Ed

ISBN: 1292089474

Category: Technology & Engineering

Page: 728

View: 9467

DOWNLOAD NOW »

For Fluid Mechanics courses found in Civil and Environmental, General Engineering, and Engineering Technology and Industrial Management departments. Structural Analysis is intended for use in Structural Analysis courses Structural Analysis provides students with a clear and thorough presentation of the theory and application of structural analysis as it applies to trusses, beams, and frames. Emphasis is placed on teaching students to both model and analyze a structure. Hibbeler's problem solving methodology, Procedures for Analysis, provides students with a logical, orderly method to follow when applying theory. Teaching and Learning Experience To provide a better teaching and learning experience, for both instructors and students, this text provides: Current Material: To keep your course current and relevant, the Ninth Edition includes new discussions and a new chapter. Problem Solving: A variety of problem types, at varying levels of difficulty, stress practical situations encountered in professional practice. Visualization: The photorealistic art program is designed to help students visualize difficult concepts. Review and Student Support: A thorough end of chapter review provides students with a concise tool for reviewing chapter contents. Triple Accuracy Checking: The accuracy of the text and problem solutions has been thoroughly checked by three other parties. MasteringEngineering is not included. Students, if MasteringEngineering is a recommended/mandatory component of the course, please ask your instructor for the correct ISBN and course ID. MasteringEngineering is not a self-paced technology and should only be purchased when required by an instructor. Instructors, contact your Pearson representative for more information. MasteringEngineering is an online homework, tutorial, and assessment product designed to personalize learning and improve results. With a wide range of interactive, engaging, and assignable activities, students are encouraged to actively learn and retain tough course concepts.

Civil Engineer's Reference Book

Author: L S Blake

Publisher: Elsevier

ISBN: 1483102335

Category: Technology & Engineering

Page: 752

View: 415

DOWNLOAD NOW »

Civil Engineer's Reference Book, Fourth Edition provides civil engineers with reports on design and construction practices in the UK and overseas. It gives a concise presentation of theory and practice in the many branches of a civil engineer's profession and it enables them to study a subject in greater depth. The book discusses some improvements in earlier practices, for example in surveying, geotechnics, water management, project management, underwater working, and the control and use of materials. Other changes covered are from the evolving needs of clients for almost all forms of construction, maintenance and repair. Another major change is the introduction of new national and Euro-codes based on limit state design, covering most aspects of structural engineering. The fourth edition incorporates these advances and, at the same time, gives greater prominence to the special problems relating to work overseas, with differing client requirements and climatic conditions. Chapters 1 to 10 provide engineers, at all levels of development, with 'lecture notes' on the basic theories of civil engineering. Chapters 11 to 44 cover the practice of design and construction in many of the fields of civil engineering. Civil engineers, architects, lawyers, mechanical engineers, insurers, clients, and students of civil engineering will find benefit in the use of this text.